Content

Products

Cell Testers

Comparison of specifications

Notes

fully suitable  fully applicable, fully suitable, standard device
suitable  Suitable to only a limited extent or available as an option
not suitable  Not suitable, can not be specified
?  Not tested, not approved

A. Application and Accuracy


CT 2d CTL 306 CT 801 CTLAB 606 CTSLAB 906
Basic information          
Fitted for laboratory not suitable fully suitable fully suitable fully suitable fully suitable
Fitted for production fully suitable fully suitable fully suitable not suitable not suitable
Cell sorter integration fully suitable not suitable fully suitable not suitable not suitable
Operation cycle <3s <3s <3s <3s <3s
Simulator class Better than AAA Better than AAA Better than AAA Better than AAA Better than AAA
Spec. irrad. distribution A A A A A
Temporal stability <1,0% 1,0% <1,0% <1,0% <1,0%
Non uniformity or irrad. <1,0% 1,0% <1,0% <1,0% <1,0%
Maximal irradiated area 22 x 22 cm 22 x 22 cm 16 x 16 cm 22 x 22 cm 22 x 22 cm

B. Testing


CT 2d CTL 306 CT 801 CTSLAB 606 CTSLAB 906
Cell type          
Mono Si fully suitable fully suitable fully suitable fully suitable fully suitable
Poly Si fully suitable fully suitable fully suitable fully suitable fully suitable
Thin Film Si, mono junction suitable fully suitable not suitable fully suitable fully suitable
Thin Film Si, multi junction suitable fully suitable not suitable fully suitable fully suitable
Thin Film CIGS suitable fully suitable not suitable fully suitable fully suitable
Thin Film CdTe suitable fully suitable not suitable fully suitable fully suitable
III - V Multijunction suitable suitable not suitable suitable suitable
           
Measurements          
I/V Curve fully suitable fully suitable fully suitable fully suitable fully suitable
Voc fully suitable fully suitable fully suitable fully suitable fully suitable
Isc fully suitable fully suitable fully suitable fully suitable fully suitable
Pmax fully suitable fully suitable fully suitable fully suitable fully suitable
Fill Factor fully suitable fully suitable fully suitable fully suitable fully suitable
Dark current fully suitable fully suitable fully suitable fully suitable fully suitable
Dark I/V fully suitable fully suitable fully suitable fully suitable fully suitable
Rsh fully suitable fully suitable fully suitable fully suitable fully suitable
Rs not suitable suitable suitable fully suitable fully suitable
alpha ¹ not suitable not suitable not suitable fully suitable fully suitable
beta ² not suitable not suitable not suitable fully suitable fully suitable
kappa ³ not suitable not suitable not suitable fully suitable fully suitable
           
Temperature          
Correction fully suitable fully suitable fully suitable fully suitable fully suitable
Control not suitable not suitable not suitable fully suitable fully suitable
           
Contact devices          
Single wire, six contact pairs fully suitable fully suitable fully suitable fully suitable fully suitable
Single wire, tailormade suitable suitable suitable suitable suitable
Pump type suitable suitable suitable suitable suitable
           
Storage of results          
Hard disk fully suitable fully suitable fully suitable fully suitable fully suitable
USB sticks fully suitable fully suitable fully suitable fully suitable fully suitable
LAN fully suitable fully suitable fully suitable fully suitable fully suitable
           
Software          
Archiving fully suitable fully suitable fully suitable fully suitable fully suitable
Statistical Analysis suitable suitable suitable suitable suitable
Lot management fully suitable suitable fully suitable suitable suitable

C. Technical parameters


CT 2d CTL 306 CT 801 CTLAB 606 CTSLAB 906
Light generator
         
Type of lamp Xenon Xenon Xenon Xenon Xenon
Type of measurement Single Flash Single Flash Single Flash Single Flash Single Flash
Guaranteed number of flashes 500.000 500.000 500.000 500.000 500.000
Light intensity (KW/m2) 0.7-1.2 0.7-1.2 0.7-1.2 0.7-1.2 0.7-1.2
load time (s) <3 <3 <3 <3 <3
light pulse duration (ms) 4 4 4 4 4
Power supply requirements incl. El. Load incl. El. Load incl. El. Load incl. El. Load incl. El. Load
           
Eletronic load          
Operating mode 4 quad. Sweep 4 quad. Sweep 4 quad. Sweep 4 quad. Sweep 4 quad. Sweep
Voltage ranges (by steps) 0.7-30 (5) 0.7-30 (5) 0.7-30 (5) 0.7-30 (5) 0.7-30 (5)
Current ranges (by steps) 0.1-30 (6) 0.1-30 (6) 0.1-30 (6) 0.1-30 (6) 0.1-30 (6)
Accuracy (by channel, %) < 0.2 < 0.2 < 0.2 < 0.2 < 0.2
Monitor cell range (mV) 10-312 10-312 10-312 10-312 10-312
Max. cont. cell output power (W) 100 100 100 100 100
Max peak cell output power (W) 300 300 300 300 300
Min. aquisition rate (msec/point) 12 12 12 12 12
D/A and A/D resolution 12 bits 12 bits 12 bits 12 bits 12 bits
Power supply requirements 115/230 V AC 115/230 V AC 115/230 V AC 115/230 V AC 115/230 V AC
Frequence 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz 50/60 Hz
           
Interfaces          
USB fully suitable fully suitable fully suitable fully suitable fully suitable
RS 232 fully suitable fully suitable fully suitable fully suitable fully suitable
Ethernet fully suitable fully suitable fully suitable fully suitable fully suitable
Profibus suitable suitable suitable suitable suitable
           
System control/ software          
PC inclusive fully suitable fully suitable fully suitable fully suitable fully suitable
Software inclusive fully suitable fully suitable fully suitable fully suitable fully suitable
Barcode labels suitable suitable suitable suitable suitable

Remarks

¹ alpha: Current coefficient versus temperature
² beta: Voltage coefficient versus temperature
³ kappa: Resistance coefficient versus temperature

Jump to Navigation


Printer Version Top of Page