Simulateurs solaires & métrologie

Une plateforme au xénon, de la cellule à l’espace, complétée par les options et l’étalonnage qui achèvent la mesure, IEC 60904-9 A+A+A+ et A++.

Tous les produits
Tous les produits
Plateformes phares
Mobile LabHighLIGHT 100ms LabHighLIGHT 100ms ProdHighLIGHT AM0Nexun LED
Gamme complète
HighLIGHT A++ ReferenceThermal ChamberIAMHighLIGHT SATSpotLIGHTGridTOUCHAmplificateur WPVS
Explorer
Actualités & articlesGuidesEntrepriseContactPasan ServicesRent a Lab
Langue
Client loginDemander un devisSuivre sur LinkedIn

IV measurement uncertainties, and the biggest contributor

After decades working on PV measurement repeatability, the biggest single source of error is rarely the one in the spec sheet. It is the operator.

IV measurement uncertainties, and the biggest contributor

Improving measurement accuracy, and in particular repeatability over the long term, on the order of a year or more, leads you to something often ignored but by far the biggest single contributor to PV measurement uncertainty.

How uncertainty is usually estimated

Uncertainty budgets are built by taking each element of the measurement chain, estimating how each can drift or be perturbed, and adding the contributions in quadrature. In a typical lab setup the main contributors are absolute irradiance, spatial non-uniformity, spectral mismatch, thermal stability, and human error.

The biggest contributor is human error

Of those, human error is by far the largest, and the hardest to predict or trace. Imagine an operator measuring tens of modules a day, all of different sizes and properties. A misaligned reference cell, a misplaced temperature probe, a wrong software parameter, and the result drifts by a few percent without anyone noticing.

There are two effective mitigations: automation and traceability.

Automation

Automation applies to the hardware setup as well as the software. Mounting the reference device on a sliding rail prevents misalignment when module thickness changes. Locking critical software parameters prevents accidental edits. Reducing the number of operator inputs to the bare minimum cuts the surface area where mistakes can land.

Traceability

Every measurement, every set of parameters and every result has to be recorded, indexed and retrievable. Daily and weekly checks, a stable reference module measured at a fixed schedule, are the simplest and most effective traceability tool. They catch everything from sensor drift to a stray patch of sunlight reaching the bench through a skylight nobody had noticed for months.

The same reasoning drives the Pasan design philosophy: lock the operator out of the parameters that matter, automate alignment, log everything, and make traceability a feature of the instrument rather than a discipline asked of the engineer. Uncertainty drops because the failure mode that dominated the budget, the operator, has been engineered out of the loop. The uncertainty tool makes that budget explicit, factor by factor.

Pasan SA
The solar reference since 1978
Produits associés
HighLIGHT A++ ReferenceGridTOUCH
Parlons-en

Vous travaillez sur un sujet similaire ? Parlons-en.

Si vous êtes confronté à un défi de mesure proche de ce que vous venez de lire, envoyez-nous un message. Nous répondons à nos e-mails.